Combined freshwater supply and waste collection in a single footprint. 330 gallons of pressurized freshwater plus 330 gallons of waste collection. The Swiss Army Knife of site trailer support — both services, one unit, one delivery.
Not every site needs 660 gallons of dedicated water or 660 gallons of dedicated waste. Many job sites run a single office trailer that needs both freshwater in and waste out — and deploying two separate boxes doubles your footprint, your delivery cost, and your coordination overhead.
The Complete Box handles both. One IBC tote carries 330 gallons of freshwater with a modular pump plate delivering pressurized output. The other tote collects 330 gallons of waste with sump basins and high-level alarms. Same cam lock connections as the dedicated Water Box and Waste Box, fully compatible for daisy-chaining when your site grows.
Every technical detail for the Complete Box. Built for construction PMs who need to spec equipment, not read marketing copy.
| Specification | Details |
|---|---|
| Capacity | 330 gallons fresh + 330 gallons waste |
| Fresh Side — Plumbing | 1" plumbing, pressure tank, 1" cam lock output |
| Fresh Side — Pump | Modular plug-and-play pump plate (DC-10 or dual RV pumps) |
| Waste Side — Alarms | High-level alarm in waste tank + high-level alarm in sump |
| Waste Side — Collection | Sump basins with 2" trunk line from waste tote |
| Pump System | Field-swappable modular pump plate (~12" x 12" board, 4-bolt mount, 12V 2-pin plug) |
| Power | DOT battery for alarm only |
| Daisy-Chain | Compatible with dedicated Water Box and Waste Box via cam lock connections |
| Electrical Board | 100% poly on aluminum tubes |
| Wheel Kit | Available, reinforced jack ports |
| Fork Pockets | Side-lift capable (must be empty) |
Need water and waste for your trailers?
The Complete Box and the dedicated Water Box / Waste Box use the same components. The decision comes down to capacity requirements and site complexity.
From delivery to full water-in and waste-out service in three steps.
Position the Complete Box adjacent to your office trailer using a forklift (fork pockets, must be empty) or wheel kit. Connect the DOT battery for alarm operation. The freshwater side arrives pre-filled or can be filled on-site. One unit, one placement.
Attach the 1" cam lock freshwater output to your trailer's water inlet. Connect the trailer's waste discharge to the waste side via 2" cam lock. Both connections use standard cam lock fittings — no special adapters, no plumber required.
Schedule freshwater refills and waste pump-outs based on your site's usage. The high-level alarm on the waste side provides advance warning before capacity is reached. The modular pump plate on the fresh side is field-swappable in under 15 minutes if service is ever needed.